Four power outlets
Four US power outlets on the raised body.
Product details · Model V15PW
The V15PW-US is a white gas-strut pop-up power unit with four US outlets. Press the top to raise it, then push it down to retract it.
Plan an 80 mm (3.15 in.) opening in a countertop up to 85 mm (3.35 in.) thick, and at least 9 in. of clear depth below the surface. A fitted 6 ft US plug is included. Rated 15 A / 1,875 W at 125 V AC, with a resettable overload breaker; IP20 for indoor, dry-location use.
ETL Listed by Intertek under control number 5024136 to UL 962A and CSA C22.2 No. 308. For USB and wireless charging, choose the white or black V15 charging model.
V15 at a glance
Four-outlet, gas-strut pop-up power unit with a fitted US plug. This base model has no USB ports or wireless charger.
Four US power outlets on the raised body.
Press to release the unit; push it down to retract it.
Supplied with a 6 ft fitted US plug.
Plan an 80 mm (3.15 in.) installation opening.
Allow at least 9 in. of clear depth below the surface.
Indoor, dry-location use only. Follow the supplied instructions and applicable electrical requirements.
Check the hole size, countertop thickness and the space needed below before you install. Select the drawing to open it full size.
(opens full size in a new tab)
Dimensions and details
Electrical, installation, delivery and support information is consolidated here so it is easier to scan.
15A, 125V AC, 1875W maximum; overload protected.
Four US outlets; IP20; 24-month warranty.
Model-specific dimensions and product information.
Contact Modern Power Solutions for installation, warranty, or product help.
Free shipping covers most U.S. addresses. Business-day orders normally dispatch within 24 hours; delivery typically takes 2–5 business days. View current shipping information.
No. V15PW-US is the four-outlet power-only model.
No product hardwiring is required. It has a fitted US plug for a receptacle below the surface.
Upright and sideways mounting are supported. Do not use the V15 upside down: although it can be physically secured in that position, the inner tower is not mechanically connected to the gas strut and may drop abruptly when released. For sideways mounting, position the unit so no receptacle face points directly upward and have a qualified installer confirm the final arrangement against local electrical requirements.