Best Epoxy Adhesive for Point Pod
The best adhesive to use for the Point Pod under-mount flange
For securing the Point Pod under-mount flange, you should use a high-strength construction adhesive that bonds well with both plastic and the surface material (such as stone, timber or laminate). Some of the best options include:
Epoxy Adhesive
- 3M™ Scotch-Weld™ Epoxy Adhesive
- Megapoxy PM Epoxy Paste Adhesive
- Devcon Plastic Welder
- Gorilla All Purpose Epoxy Stick
- Selleys Araldite Super Strength Epoxy Glue
Other Options
Epoxy offers a high-strength, fast-curing adhesive specifically designed for bonding plastics to rigid surfaces.
Note: the same adhesive can be used to glue the top counter piece inside the Point Pod top cup.
Point Pod Adhesive Installation
Tips for Bonding Stone to the Point Pod Plastic Flange:
Surface Preparation:
Ensure both the stone and plastic flange surfaces are clean, dry, and free from any dust, grease, or dirt.
Scratching the Plastic:
While not always necessary, lightly scratching the plastic surface can enhance the bond's strength by increasing the surface area.
Two-Part Epoxy:
Two-part epoxies provide a stronger bond than single-part epoxies because they involve mixing a resin and a hardener, which creates a chemical reaction that results in a durable bond.
Follow Instructions:
Always follow the manufacturer's instructions for mixing and applying the epoxy, as this will ensure a proper and strong bond.
Consider the Application:
If you need a quick-setting epoxy, look for products like Megapoxy PF Rapid Set Epoxy Adhesive, which is designed for emergency repairs and quick bonding.
Consider the environment:
If the bond will be exposed to water or extreme temperatures, choose an epoxy that is specifically designed for those conditions.
