Innovative Power Outlet Products
Modern Electrical Outlets for the 21st Century.
-
RCT2XX
Hubbell Dual-Sided Countertop Pop Up Receptacle
3.5" HoleSpring-Lift20 Amps15 AmpsSpill-Sealed LidVendor:Hubbell4.86 / 5.0
(7) 7 total reviews
Regular price From $285.95 USDRegular priceSale price From $285.95 USD -
RCT6X0XX
Hubbell Tri-Power Countertop Pop Up Receptacle
4" HoleSpring-LiftUSB-A20 Amps15 AmpsWireless ChargingSpill-Sealed LidUSB-CVendor:Hubbell5.0 / 5.0
(3) 3 total reviews
Regular price From $389.95 USDRegular priceSale price From $389.95 USD
Collection: Hubbell Countertop Receptacles
Hubbell · USA
Hubbell pop-up outlets for kitchen countertops
Hubbell’s countertop receptacles are hardwired pop-up outlets, listed for kitchen and bathroom countertops. Press the cover and the outlet rises; press again and it drops back down. Two models, each in 15 A or 20 A and seven finishes.
Quick answers
Which Hubbell should I buy?
Dual-Sided for power, Tri-Power for charging. The Dual-Sided has an outlet on each side; the Tri-Power has one outlet plus USB-A, USB-C and a Qi charging top. Both come in 15 A or 20 A: match your circuit.
Do they need an electrician?
Yes: they’re hardwired. There’s no cord or plug. A qualified electrician wires the unit to a GFCI-protected circuit.
What size hole?
3.47–3.63″ for the Dual-Sided, 4.00–4.16″ for the Tri-Power. In a countertop 0.56″ to 2.13″ thick (Dual-Sided) or up to 2.50″ (Tri-Power).
Are they listed for countertops?
Yes: cULus listed to UL 498. Hubbell lists both as receptacle assemblies for kitchen and bathroom countertops, per NEC 406.5(E). Your inspector has the final say.

Hubbell Dual-Sided
2 outlets · 15 A or 20 A · 3½″ hole
- One tamper-resistant outlet on each side
- Surface mount, or flush in a 4″ counterbore
- Seven finishes, from white to bronze

Hubbell Tri-Power
1 outlet · USB-A, USB-C, Qi · 4″ hole
- One outlet, USB-A and USB-C up to 18W
- Qi charging on top, raised or closed
- 15 A or 20 A; surface mount; seven finishes
Need help choosing?
Hardwired or plug-in?
See Hubbell beside the plug-in Point Pod Connect: listings, holes and depths. Or send us a photo of your countertop.
Compare
Dual-Sided or Tri-Power?
Sizes from Hubbell’s instructions and drawings. Check the model number before the countertop is cut.
Body below = how far the unit reaches under the countertop; allow extra room for the cable.


Planning
Planning a Hubbell install
Hubbell receptacles are shallow: the body reaches 4.72″ below the countertop on the Dual-Sided and 5.59″ on the Tri-Power, plus room for the cable. Your fabricator cuts the hole; a qualified electrician brings a GFCI-protected circuit to the spot and wires the unit in.
- How to install a pop-up outlet, step by step
- Kitchen island outlet code: what the NEC asks for
- Pop-up outlets listed for kitchen countertops, compared
Questions
Hubbell pop-up outlet FAQs
How do you install a Hubbell countertop receptacle?
A qualified electrician installs it to Hubbell’s instructions: cut the hole (plus a 4″ counterbore 0.09″ deep for a flush-mount Dual-Sided), wire the unit with non-metallic sheathed cable or ½″ conduit, drop it in and hand-tighten the lock nut underneath. Press the cover to pop it up. The install guides are linked in the comparison above.
Do Hubbell pop-up outlets need GFCI?
Yes, in a kitchen. Neither model has GFCI protection built in, so the circuit feeding it needs it: a GFCI breaker or a GFCI receptacle upstream.
Are Hubbell pop-up outlets listed for countertops?
Yes. Hubbell lists both as receptacle assemblies for kitchen and bathroom countertops (cULus, UL 498, including its countertop spill test), per NEC 406.5(E), which the 2026 NEC renumbers as 406.14(E). Your inspector has the final say; the spec sheets above show the listing. More in our island outlet code guide.
Can a Hubbell pop-up sit flush with the countertop?
The flush-mount Dual-Sided (RCT201 and RCT221) sits in a 4″ counterbore 0.09″ deep, so its flange is level with the countertop. The surface-mount Dual-Sided and the Tri-Power sit on a round flange on top. For an outlet hidden under a disc of your own stone, see Point Pod Connect, which plugs in rather than being hardwired.
How thick can the countertop be?
0.56″ to 2.13″ for the Dual-Sided and 0.56″ to 2.50″ for the Tri-Power, per Hubbell. For thicker stone, or stone on a plywood sub top, Point Pod Connect fits countertops ½″ or thicker with no maximum.
What do the Hubbell model numbers mean?
RCT200 and RCT201 are the 15 A Dual-Sided (surface and flush mount), RCT220 and RCT221 the 20 A. RCT600 is the 15 A Tri-Power and RCT620 the 20 A. The letters after the number are the finish: W white, BK black, ALU aluminum, BR brass, NI nickel, CH chrome and BZE bronze.

